Makita 9523NBH Angle Grinder page 4

SPECIFIC SAFETY RULES FOR GRINDER
1.
Always use proper guard with grinding wheel.
A
guard protects operator from
broken wheel fragments.
2.
Accessories must be rated for at least the speed recommended on the tool
warning label. Wheels and other accessories running over rated speed can fly
apart and cause injury.
3. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact
with
a
"live"
wire will make exposed metal parts of the tool "live" and shock the
operator.
4.
Never use hubbed grinding wheels on this tool (for
9523NBH
only).
SYMBOLS
The followings show the symbols used for tool.
V
.................................
volts
A ................................. amperes
Hz ................................. herts
kg ................................. kilograms
h ................................. hours
min
.................................
minutes
S
.................................
seconds
' L
.................................
alternating current
-
direct current
n , ................................. no load speed
____
.................................
' L
................................. alternating or direct current
.
.................................
Class II Construction
A
................................. splash-proof construction
4 4
................................. watertight construction
...
/min
*
................................. number of blow
................................ revolutions or reciprocation per minute
4