Program Playback - AEG BSS 4808 Manual

Description of the Operating Buttons
PLAY/PAUSE (8/11)
You may temporarily stop playback and start again. The
elapsed playing time will flash on the display. Pressing the
button again will continue playback from the same position.
/ SKIP/TUNING UP/DOWN (9/8)
During playback:
With the button you may skip to the next or next but one
track, etc. Press and hold this button to quickly search music
(sound will be muted).
You may operate the button as followed:
Press 1 x = Starts current track again from the beginning.
Press 2 x = Skips back to previous track.
Press 3 x = Plays track prior to that, etc. Press and hold
this button to quickly search music (sound will
be muted).
During radio mode:
Tune the desired radio station.
STOP (7/9)
The CD or the songstops.
During FM radio mode:
Switch between STEREO and MONO.
MUTE (15/15)
Quickly turn off the sound. "MUTE" will flash in the display.
To cancel this function, press MUTE again.
EQ (18/7)
(Preset equalizer function). There are different sound modes
available (CLASSIC, ROCK, POP, JAZZ, FLAT).
REPEAT/INTRO (6/13)
Press 1x: (REPEAT lights up) The current track will be
repeated entirely.
Press 2x: (REPEAT ALL lights up) The complete CD will
be repeated entirely.
Press 3x: (INTRO lights up) Each title of the CD will be
played for 10 seconds.
Press 4x: All functions will be canceled. Normal play-
back will be continued.
Only for CDs in MP3 format:
Press 1x: The current track will be repeated continu-
ously (The display will show REPEAT).
Press 2x: The selected folder of the MP3 CD will be
repeated continuously (the display will show
REPEAT ALBUM). Use FOLDER+/- buttons
(14/16/14) to select the individual folders.
Press 3x: The entire CD will be repeated continuously
(REPEAT ALL is displayed).
Press 4x: Each title of the CD will be played for 10 sec-
onds each (INTRO will appear on the display).
Press 5x: The function will be deactivated and the CD
will be played in normal mode.
RANDOM (12 on the remote)
The display will show "RANDOM" and the number of the
track that will be played first. All tracks will be played con-
secutively in random order.
FOLDER +/- (14/16/14)
CD in MP3 format:
Press these buttons during playback to switch one folder up
or down. The display shortly shows a message, e.g. ALBUM
02, Then the system automatically starts play-back of the MP3
CD. When pressing the buttons during stop mode, the mes-
sage will also shortly be shown in the display. Then press
PLAY/PAUSE to start playback.
PRESET (5 on the remote)
During radio mode:
Select a stored radio station.
ID3 (6 on the remote)
In case of a CD or file in the MP3 format:
Press the button to turn on the function. "ID3 ON" will show
in the display for a short time. In case of a stored ID-3 Tag in-
formation it will show up in the display as a continuing band.
Press the button again to deactivate the function. "ID3 OFF"
will show in the display for a short time.
PROG (10/4)
To save the stations and to set the programmed playback.

Program Playback

Program playback in desired sequence. (Only in CD/USB/SD
mode)
1. Press STOP button (7/9).
2. Press PROG button (10/4). The display will show "- - - -
PR:01" ("track" PR: "memory position") and MEMORY.
Use the / buttons (9/8) to select the desired track and
press PROG buttons again. The display will change to
memory position P02.
3. Use the / buttons to select the next track and press
PROG again. Repeat the steps until you have selected all
tracks.
NOTE:
If the memory capacity of the programmable title is
reached, "FULL" will be displayed.
4. Press the PLAY/PAUSE button (8/11). Playback starts.
The display will show the first selected track number.
5. Press STOP button once to stop playback. The memory
will be kept.
English
51