Engine; Flushing Device; Install Cowling - Yamaha F75B Owner's Manual

Operation
1. Lower level mark
2. Oil dipstick
3. Upper level mark
EMU27151

Engine

Check the engine and engine mounting.
G
Look for loose or damaged fasteners.
G
Check the propeller for damage.
G
Check for oil leaks.
G
EMU36490

Flushing device

Check that flushing device's garden hose
connector is securely screwed on to the fitting
on the bottom cowling. NOTICE: If the flush-
ing device is not properly connected, cool-
ing water can leak out and the engine can
overheat during operation.
1
1. Fitting
2. Flushing device
EMU36961

Install cowling

1. Be sure that all cowling lock levers are re-
leased.
40
[ECM01800]
2
ZMU06166
2. Be sure that the rubber seal is seated all
the way around the engine.
3. Place the cowling on top of the seal.
4. Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5. Move the levers to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
the cowling can damage the engine, or
the cowling can blow off at high
speeds.
[ECM01990]
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
ZMU06131
ZMU06132