Specifications And Requirements; Specifications - Yamaha F75B Owner's Manual

EMU34520

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
TIP:
"*" means, select the engine oil referring to the
chart of engine oil paragraph. For further infor-
mation, see page 12.
EMU2821C
Dimension:
Overall length:
F100DET 825 mm (32.5 in)
F75BET 817 mm (32.2 in)
F80BET 825 mm (32.5 in)
F90BET 825 mm (32.5 in)
Overall width:
479 mm (18.9 in)
Overall height L:
1582 mm (62.3 in)
Overall height X:
F100DET 1709 mm (67.3 in)
F75BET 1710 mm (67.3 in)
F80BET 1709 mm (67.3 in)
F90BET 1709 mm (67.3 in)
Transom height L:
536 mm (21.1 in)
Transom height X:
664 mm (26.1 in)
Weight (AL) L:
170.0 kg (375 lb)
Weight (AL) X:
174.0 kg (384 lb)
Weight (SUS) L:
172.0 kg (379 lb)
Weight (SUS) X:
176.0 kg (388 lb)

Specifications and requirements

Performance:
Engine:
Full throttle operating range:
5000–6000 r/min
Maximum output:
F100DET 73.6 kW@5500 r/min (100
HP@5500 r/min)
F75BET 55.2 kW@5500 r/min (75
HP@5500 r/min)
F80BET 58.8 kW@5500 r/min (80
HP@5500 r/min)
F90BET 66.2 kW@5500 r/min (90
HP@5500 r/min)
Idling speed (in neutral):
700 ±50 r/min
Type:
4-stroke L
Displacement:
1596.0 cm³
Bore × stroke:
79.0 × 81.4 mm (3.11 × 3.20 in)
Ignition system:
TCI
Spark plug (NGK):
LFR5A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.17–0.23 mm (0.0067–0.0091 in)
Valve clearance (cold engine) EX:
0.31–0.37 mm (0.0122–0.0146 in)
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
9