Makita GD0800C Instruction Manual page 7

ASSEMBLY
Installing or removing wheel point
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the wheel point.
Loosen the collet nut and insert the wheel
point into the collet nut. Use the smaller
wrench to hold the spindle and the larger
one to tighten the collet nut securely.
more than 8 mm (5/16") from the collet nut.
Exceeding this distance could cause vibra-
tion or a broken shaft.
To remove the wheel point, follow the
installation Drocedure in reverse.
The wheel point should not be mounted
I
I
CAUTION:
A
1/4"
collet cone is provided as standard equipment. Use an optional collet cone 1/8" to
install a 1/8" shank wheel point.
8 mm (5/16") Max
7