Using The Radio - Honda DEH-M6156ZH Owner's Manual

USING THE RADIO

[4] [5] [6] [7] [8]
[15] [14] [12]
LISTENING TO
THE RADIO ............. [8]
When button [8] is pressed, the radio
power is turned on and the Band 8
and Frequency 9 are displayed. To
turn the radio off, press button [15].
CHANGING THE BAND ....... [8]
The band is selected by pressing
button [8] repeatedly. Each time the
button is pressed, the band changes in
the following order:
U1 (FM1) t t U2 (FM2) t t LW t t MW
AUTOMATIC TUNING ....... [14]
Pressing button [14] 4 or ¢ for
less than 0.5 seconds selects Seek
Tuning.
8
Pressing button [14] 4 or ¢ for 0.5
seconds or longer lets you skip
broadcast stations while the button is
pressed. Seek Tuning resumes when
you stop pressing the button.
Advice
• Pressing button [14] 4 or ¢
again during Seek Tuning cancels
Seek Tuning.
[10]
MANUAL TUNING ...................... [10]
This is useful for tuning in to a station
[15]
with a very weak signal that cannot be
picked up with automatic tuning.
Turning the tuning dial [10] clockwise
or counterclockwise raises or lowers
the frequency one step at a time.
MEMORIZING STATIONS (PRESET
MEMORY)
A selected station is memorized in one
of buttons [12].
Memorizing a Station ............. [12]
Choose one of buttons [12], and hold it
down until you hear a beep (about 2
seconds). The preset number 7 will
0.5
light, and the station will be
memorized in the chosen button.
Advice
• The radio cannot be heard while
the button is being held down.
Recalling a Station .................. [12]
When the button [12] is pressed again
after a station has been memorized, the
radio will be tuned to the station stored in
that button. The number of the pressed
button lights in 7 on the display.
SEEK SCAN .......................... [4]
Pressing button [4] starts Seek Tuning
operation. When a station
broadcasting a strong signal is
detected, that station is received for 5
seconds. If you do not press a button
within 5 seconds, Scan continues to
search for the next station and
"SCAN" 5 is displayed. If you find a
station you want to listen to, press
button [4] to cancel Scan.
Advice
• If you cancel Scan when Seek
2
Tuning stops for 5 seconds, that
station is received.
• If you cancel Scan during Seek
Tuning, the station received
before Scan operation began is
received.
• If there is an RDS interruption,
Scan is canceled.