Camshaft Installation; Camshaft Holder Assembly - Honda 1998 VT750C Service Manual

CYLINDER HEAD/VALVES
CAMSHAFT INSTALLATION
CAMSHAFT HOLDER ASSEMBLY
INTAKE ROCKER ARM SHAFT
EXHAUST ROCKER ARM SHAFT
EXHAUST ROCKER ARM
NOTE:
Camshaft lubricating oil is fed through oil passages
in the cylinder head and camshaft holder. Clean the
oil passages before assembling the cylinder head
and camshaft holder.
Lubricate each rocker arm shaft outer sliding surfaces
with molybdenum disulfide oil.
Apply engine oil to the valve adjusting screw threads
and seating surface.
Install the valve adjusting screw and lock nut.
10-26
VALVE ADJUSTING SCREW
LOCK NUT
/
~
VALVE ADJUSTING SCREW
~
INTAKE ROCKER ARM
WAVE WASHER
CAMSHAFT HOLDER
SHAFTS
- , ADJUSTING SCREW
LOCK NUT