ET1 Enterprise Tablet User Guide
2.12 Resetting the Device
There are two reset functions, soft reset and hard reset.
2.12.1 Performing a Soft Reset
Perform a soft reset if applications stop responding.
Procedure Steps
1
Press and hold the Power button until the menu appears.
Touch Reset.
2
3
The device shuts down and then reboots.
2.12.2 Performing a Hard Reset
Performing a hard reset with a SIM card installed in the ET1N2 may cause damage or data
corruption to the SIM card.
Perform a hard reset if the ET1 stops responding. To perform a hard reset:
Procedure Steps
1
Simultaneously press the Power, Left Scan/Action and Right Scan/Action buttons.
2
The ET1 shuts down and then reboots.
2.13 Wake-up Settings
The wake-up conditions define what actions wake up the ET1 after it has gone into suspend mode. The ET1 can go
into suspend mode by either pressing the Power button or automatically by a time-out
Default Settings
Table 2-5 Wake-up Default Settings
Condition for Wake-up
AC power is applied.
ET1 is inserted into a cradle.
2-20
list the default wake up conditions.
Power Button
No
Yes
settings.Table 2-5 Wake-up
Automatic Time-out
Yes
Yes
MN000022A01 - May 2013