Replacing The Microsd Card; Figure 1-6 Removing The Battery - Motorola ET1 User Manual

ET1 Enterprise Tablet User Guide
Procedure Steps
1 Press the Power button until the menu displays.
Touch Battery Swap. The Scan LED lights red.
2
3 Wait until the Scan LED turns off.
4 Press thumb against the side of the ET1 and battery. Using the index and middle fingers, move the battery
release latch toward thumb.
Pull the battery out of the battery compartment.
5

Figure 1-6 Removing the Battery

Align the tracks on the side of the replacement battery with the rails in the battery compartment.
6
7 Push the battery in until the battery release latch snaps into place.
8 Press the Power button to turn on the ET1.

1.5 Replacing the microSD Card

For proper electrostatic discharge (ESD) precautions to avoid damaging the SD card. Proper
ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user
is properly grounded.
Changing the microSD card can change the functionality of the ET1.
To replace the microSD card:
1-10
MN000022A01 - May 2013