Adjusting General Options - Fujitsu control 4 0812 User Manual

• In a 1:1 scaling ratio, every mouse movement on the desktop window sends
an equivalent mouse movement to the target device.
• In a 2:1 scaling ratio, the same mouse movement sends a 2X mouse
movement.
• In a 1:2 scaling ratio, the value is 1/2X.
To set mouse scaling:
1. Select Tools-Session Options from the Video Viewer menu. The Session
Options window opens.
2. Click the Mouse tab.
3. To use one of the preconfigured settings, check the corresponding radio
button in the Mouse Scaling area.
4. To set custom scaling, click the Custom radio button. The X and Y fields
become enabled. Type a mouse scaling value in the X and Y fields. For
every mouse input, the mouse movements are multiplied by the
corresponding X and Y scaling factors. Valid input ranges are 0.25 to 3.00.
Single cursor mode
When using single cursor mode, the Video Viewer title bar will show the
keystroke that should be pressed to exit this mode.
To change the terminating keystroke for single cursor mode:
1. Select Tools-Session Options from the Video Viewer menu. The Session
Options window opens.
2. Click the Mouse tab.
3. Select the desired terminating keystroke from the drop down list in the Single
Cursor Mode area.
4. Click OK.
4.9

Adjusting general options

The General tab in the Session Options window allows you to control Keyboard
Pass-through in non-full screen mode, Menu Activation Keystroke, and
Background Refresh.
To adjust general options:
1. Select Tools-Session Options from the Video Viewer menu. The Session
Options window opens.
590-1059-640A
4.9 Adjusting general options
57