2
Installing Internal Options
This chapter explains installation of internal options.
2.1
Attaching/Removing the Top Cover
When installing an I/O module and SCSI cable kit, remove this product's top cover. The procedure
for attaching/removing the top cover is as follows.
Removing the top cover
1
Turn off this product and all servers that are connected to this
product, and unplug the power cable.
2
Slide the top cover backward and lift up while sliding the lock
levers at the rear right and left to remove the cover from this
product.
[Rear]
56
Lock levers
Top cover
[Rear]