Rear Panel - HP Integrity rx2620 User's & Service Manual

Rear Panel

The server rear panel includes communication ports, I/O ports, AC power connectors,
and the Locator LED/button. Additional LEDs located on the rear panel of the server
signal the operational status of the LAN connector of the optional iLO MP. For the
location and description of the ports and connectors, see
Figure 11 Rear View
Table 11 Rear Panel Connectors and Switches
Connector/Switch
AC Power
LVD/SE SCSI
(LAN Gb A)
10/100/1000 LAN
(LAN Gb B)
10/100/1000 LAN
Serial A (console)
and Serial B
USB
TOC
Locator Button and
LED
VGA (optional)
Console/Remote/UPS
(optional)
10/100 iLO MP LAN
(optional)
1
Graphics cards can include a 15-pin connector, a 18-pin connector, or both. Only one connecting cable
is needed for each monitor.
Function
Primary power connection (AC1) for the server. A second connector (AC2) is
available for the optional, N+1 redundant power supply.
68-pin, low-voltage differential, single-ended U320 SCSI. This connector provides
external SCSI connection on Core SCSI Channel B
10/100/1000 base-T Ethernet LAN connector
10/100/1000 base-T Ethernet LAN connector
9-pin male serial connectors. Serial Port A is used as the console connection
when the optional iLO MP is not installed.
Four universal serial bus (USB 2.0) connectors
Transfer of Control button. Halts all system processing and I/O activity and
restarts the computer system preserving system memory contents.
The Locator button and LED are used to help locate a server within a rack of
servers. When the button is engaged, the blue LED illuminates and an additional
blue LED on the front panel of the server illuminates. This function can be
remotely activated by the LOC command of the optional iLO MP.
1
15-pin female video connector. The optional iLO MP provides a connector to
support a VGA monitor.
25-pin female serial data bus connector for the optional iLO MP. This connector
connects to a three-port breakout cable (HPE P/N A6144-63001) with individual
connectors for Console, Remote and UPS. The Console connector becomes
the console connection when iLO is installed.
10/100 Mb LAN connector for the optional iLO MP. Provides LAN console access
allowing Wake-On-LAN, Power-On-LAN, and Alert-On-LAN functions. For details
on iLO MP commands, see the HPE Integrity and HPE 9000 iLO Operations
Guide.
Figure 11 and Table 11.
24