Breville HotCup VKJ367 Manual page 12

DESCALING
To maintain it's performance, your HotCup
months or so. You may need to descale your HotCup
hard water area.
By changing the MAXTRA
BRITA recommends to exchange the MAXTRA
®
1. Completely remove the lid and remove the filter funnel and filter. Fill your HotCup
to the MAX marking on the water chamber and place an empty cup on the drip tray.
Replace the lid. Select a suitable setting for the dispensing control and press the
start button. Wait for the water to be dispensed into the cup.
2. Add a citric acid-based proprietary descaling product to the hot water in the cup and
stir.
3. Tip the contents of the cup into your HotCup
4. Place the empty cup on the drip tray and press the start button.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until your HotCup
water to the MAX fill level and place an empty cup on the drip tray.
8. Press the start button and wait for the water to be dispensed into the cup.
9. Discard the water in the cup.
10. Repeat steps 8 and 9 until your HotCup
descaling solution from your HotCup
11. When your HotCup
HotCup is ready for use again.
™
12
™
cartridge more frequently, you will need to descale less often.
®
.
™
is completely cleaned, reinsert the filter funnel and filter. Your
™
will require descaling once every three
more frequently if you live in a
™
cartridge every 4 weeks.
®
and close the lid.
™
is empty. Fill your HotCup
™
is empty. This will rinse any remaining
™
™
with fresh
™