NETGEAR RangeMax WPN824 Reference Manual page 94

Reference Manual for the RangeMax Wireless Router WPN824
Figure 8-10: Static Route Summary Table
To add or edit a Static Route:
Click the Add button to open the Add/Edit Menu, shown below.
1.
Figure 8-11. Static Route Entry and Edit Menu
Type a route name for this static route in the Route Name box under the table.
2.
(This is for identification purposes only.)
Select Private if you want to limit access to the LAN only. The static route will not be reported
3.
in RIP.
Select Active to make this route effective.
4.
Type the Destination IP Address of the final destination.
5.
Type the IP Subnet Mask for this destination.
6.
If the destination is a single host, type 255.255.255.255.
Type the Gateway IP Address, which must be a router on the same LAN segment as the router.
7.
8-18
202-10072-01, March 2005
Advanced Configuration of the Router