NETGEAR RangeMax WPN824 Reference Manual page 60

Reference Manual for the RangeMax Wireless Router WPN824
This screen shows the following parameters:
Table 6-1. Wireless Router Status Fields
Field
Account Name
Firmware Version
Internet Port
MAC Address
IP Address
DHCP
IP Subnet Mask
DNS
LAN Port
MAC Address
IP Address
IP Subnet Mask
DHCP
6-2
Description
This field displays the Host Name assigned to the router.
This field displays the router firmware version.
These parameters apply to the Internet (WAN) port of the router.
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
This field displays the Domain Name Server addresses being used by
the router.
These parameters apply to the Local (LAN) port of the router.
This field displays the Media Access Control address being used by the
LAN port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.1.1
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
202-10072-01, March 2005
Maintenance