Adding A Custom Service; Editing Or Deleting A Port Forwarding Entry - NETGEAR WGR614 v6 Reference Manual

Adding a Custom Service

To define a service, game or application that does not appear in the Services & Games list, you
must determine what port numbers are used by the service. For this information, you may need to
contact the manufacturer of the program that you wish to use. When you have the port number
information, follow these steps:
Click the Add Custom Service button.
1.
Figure 6-4: Ports - Custom Services Menu
Type the service name in the Service Name box.
2.
Type the beginning port number in the Starting Port box.
3.
• If the application uses only a single port; type the same port number in the Ending Port
box.
• If the application uses a range of ports; type the ending port number of the range in the
Ending Port box.
Type the IP address of the computer in the Server IP Address box.
4.
Click Apply to save your changes.
5.

Editing or Deleting a Port Forwarding Entry

To edit or delete a Port Forwarding entry, follow these steps.
In the table, select the button next to the service name.
1.
Click Edit or Delete.
2.
A d va n ce d C on figu ra tion of th e R ou ter
Reference Manual for the 54 Mbps Wireless Router WGR614 v6
202-10099-01, April 2005
6 -5