Configuring Static Routes - NETGEAR WGR614 v6 Reference Manual

Reference Manual for the 54 Mbps Wireless Router WGR614 v6
Select the Use a dynamic DNS service check box.
2.
Select the name of your dynamic DNS Service Provider.
3.
Type the Host Name (or domain name) that your dynamic DNS service provider gave you.
4.
Type the User Name for your dynamic DNS account.
5.
Type the Password (or key) for your dynamic DNS account.
6.
If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
7.
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
Click Apply to save your configuration.
8.

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route menu, shown below.
Figure 6-9. Static Route Summary Table
6 -1 4
202-10099-01, April 2005
A d va n ced C on figu ra tion of th e R ou te r