Viewing A List Of Attached Devices; Configuration File Management - NETGEAR WGR614 v5 Reference Manual

Table 6-3: Router Statistics Items
Item Description
Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time The amount of time since the router was last restarted.
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 6-4: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Configuration File Management

The configuration settings of the WGR614 v5 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Maintenance
Reference Manual for the 54 Mbps Wireless Router WGR614 v5
July 2004 202-10036-01
6-5