How To Configure Wpa-Psk Wireless Security; How To Restrict Wireless Access By Mac Address - NETGEAR WGR614 v5 Reference Manual

How to Configure WPA-PSK Wireless Security

Note: Not all wireless adapters support WPA. Furthermore, client software is also required.
Windows XP and Windows 2000 with service pack 3 do include WPA support. Nevertheless, the
wireless adapter hardware and driver must also support WPA. For instructions on configuring
wireless computers or PDAs for WPA-PSK security, consult the documentation for the product
you are using.
To configure WPA-PSK, follow these steps:
Click Security Settings in the Setup section of the main menu and select WPA-PSK for the
1.
Security Type.
Figure 4-6: WPA Settings menu
Enter a word or group of 8-63 printable characters in the Password Phrase box.
2.
Click Apply to save your settings.
3.

How to Restrict Wireless Access by MAC Address

To restrict access based on MAC addresses, follow these steps:
Wireless Configuration
Reference Manual for the 54 Mbps Wireless Router WGR614 v5
June 2004 202-10036-01
4-11