How To Configure Wpa-Psk Or Wpa2-Psk Wireless Security - NETGEAR RangeMax Next Wireless Router WNR834M Reference Manual

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual
• Manual — Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These
entries are not case sensitive; AA is the same as aa.
Select which of the four keys to activate.
See "Wireless Communications" in Appendix B
as defined by the IEEE 802.11 wireless communication standard.
6. Click Apply to save your settings.

How to Configure WPA-PSK or WPA2-PSK Wireless Security

Note: Not all wireless adapters support WPA. Furthermore, client software is also
required. Windows XP with Service Pack 2 does include WPA support.
Nevertheless, the wireless adapter hardware and driver must also support WPA.
For instructions on configuring WPA-PSK security, consult the documentation for
the product you are using.
To configure WPA-PSK or WPA2-PSK, follow these steps:
1. Click Wireless Settings in the Setup section of the main menu.
2. The WPA-PSK [TKIP] + WP2-PSK [AES] is the most flexible, since it allows clients using
either WPA-PSK or WPA2-PSK.
Figure 3-6
3. Enter a word or group of 8-63 printable characters in the Passphrase box.
4. Click Apply to save your settings.
Wireless Configuration
for a full explanation of each of these options,
v1.3, May 2006
3-11