NETGEAR RangeMax NEXT WNR854T User Manual page 41

3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
Figure 3-7
4. If the desired computer appears in the Available Wireless Cards list, you can click the radio
button of that computer to capture its MAC address; otherwise, you can manually enter a name
and the MAC address of the authorized computer. You can usually find the MAC address on
the bottom of the wireless device.
Tip: You can copy and paste the MAC addresses from the router's Attached Devices
menu into the MAC Address box of this menu. To do this, configure each
wireless computer to obtain a wireless link to the router. The computer should
then appear in the Attached Devices menu.
5. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen.
6. Repeat step 3 through
Safeguarding Your Network
NETGEAR RangeMax™ NEXT Wireless Router WNR854T User Manual
step 5 for each additional device you want to add to the list.
v1.1, January 2007
3-13