NETGEAR RANGEMAX WNDR3300 User Manual page 66

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
To configure LAN IP settings, log in to the router, and under the Advanced heading, select LAN
Setup. The following screen displays:
Figure 5-1
If you make changes you must click Apply in order for the changes to take effect.
Note: If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
The LAN Setup fields are explained in the following table.
Table 5-1. LAN Setup
Settings
Device Name
5-2
Description
A descriptive name for the router, which will be shown in the
Network on Windows Vista and the Network Explorer on all
Windows systems. The Device Name field cannot be blank.
v1.1, October 2008
Customizing Your Network Settings