NETGEAR RANGEMAX WNDR3300 User Manual page 57

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
You can use the Show Statics and Connection Status buttons to view additional status information,
as described in "Connection Status" on page 4-6
explains Router Status screen fields.
Table 4-1. Wireless Router Status Fields
Field
Account Name
Firmware Version
Internet MAC Address
Port
IP Address
DHCP
IP Subnet Mask The IP subnet mask being used by the Internet (WAN) port of the router. For
Domain Name
Server
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask The IP subnet mask being used by the Ethernet (LAN) port of the router.
Wireless Name (11N
Port SSID)
Name (11G
SSID)
Region
11N Channel
Using Network Monitoring Tools
and
Description
The host name assigned to the router.
The version of the router firmware. It changes if you upgrade the router.
The Media Access Control address. This is the unique physical address
being used by the Internet (WAN) port of the router.
The IP address being used by the Internet (WAN) port of the router. If no
address is shown, or is 0.0.0.0, the router cannot connect to the Internet.
• None. The router uses a fixed IP address on the WAN.
• DHCP Client. The router obtains an IP address dynamically from the ISP.
an explanation of subnet masks and subnet addressing, click the link to the
online document "TCP/IP Networking Basics" in Appendix
The Domain Name Server addresses being used by the router. A Domain
Name Server translates human-language URLs such as www.netgear.com
into IP addresses.
The Media Access Control address. This is the unique physical address
being used by the Ethernet (LAN) port of the router.
The IP address being used by the Ethernet (LAN) port of the router. The
default is 192.168.1.1.
Identifies whether the router's built-in DHCP server is active for the LAN-
attached devices.
The default is 255.255.255.0.
The 11N wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR-DualBand-N.
The 11G wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR-2.4-G.
The geographic region where the router is being used. It might be illegal to
use the wireless features of the router in some parts of the world.
Identifies the 11N channel of the wireless port being used. Click the link to
the online document "Wireless Networking Basics" in Appendix B
frequencies used on each channel. In Up to 270Mbps at 5GHz & 54Mbps
at 2.4GHz mode, there are two channels: a primary channel (P) and a
secondary channel (S).
v1.1, October 2008
"Statistics" on page 4-7. The following table
B.
for the
4-5