Setting The Password; Upgrading The Modem Firmware - NETGEAR MBM621 User Manual

Setting the Password

NETGEAR recommends that you change the default password to a more secure password. The
ideal password should contain no dictionary words from any language, and should be a mixture of
both upper-case and lower-case letters, numbers, and symbols. Your password can be up to 30
characters.
To change the administrator password:
1. Log in to the modem at its default LAN address of http://modemlogin.net with its default
user name of admin, and default password of password, or using whatever user name,
password, and LAN address you have chosen for the modem.
2. From the main menu, select Set Password.
Figure 2-6
3. Enter the old password, enter the new password, and then repeat the new password.
4. Click Apply to save your changes.
Note: If you want to continue configuring modem after changing the password, you
must log in again. If you have backed up the modem settings previously, you
should do a new backup so that the saved settings file includes the new
password.

Upgrading the Modem Firmware

The software of the Mobile Broadband Modem is stored in FLASH memory, and can be upgraded
as new software is released by NETGEAR.
Upgrade files can be downloaded from the NETGEAR website. If the upgrade file is compressed
(.zip file), you must first extract the binary (.chk) file before uploading it to the modem.
Settings and Maintenance
Mobile Broadband Modem MBM621 User Manual
v1.0, September 2007
2-7