Attached Devices - NETGEAR MBM621 User Manual

Mobile Broadband Modem MBM621 User Manual
Table 2-2. Modem Status Screen (continued)
Settings and Statistics
WAN Port Connection Status
IP Address
WAN Protocol
IP Subnet Mask
Gateway IP Address
Domain Name Server (DNS) The DNS server IP addresses used by the modem. These
Connection Status and Refresh buttons
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask
Show Statistics button

Attached Devices

View a list of devices attached to the Mobile Broadband Modem.
Figure 2-3
For each device, the table shows the IP address, device name if available, and the Ethernet MAC
address. Note that if the modem is rebooted, the table data is lost until the modem rediscovers the
devices. To force the modem to look for attached devices, click Refresh.
2-4
Description
The status of the Internet connection.
The IP address of your modem, as seen from the Internet. If the
modem is not connected to the Internet, this will be blank or
0.0.0.0
The current connection protocol being used.
The subnet mask associated with the Internet IP address
Domain Name Server.
This must be a router on the same LAN segment as your
modem.
addresses are usually obtained dynamically from the ISP.
The MAC address of the modem as seen from the LAN.
The LAN IP address of the modem.
Indicates if the modem is acting as a DHCP server for devices
on your LAN.
The subnet mask associated with the
v1.0, September 2007
Settings and Maintenance