NETGEAR DG834G Reference Manual page 52

Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
If the wireless station is currently connected to the network, you can select it from the
4.
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
If the wireless station is not currently connected, you can enter its address manually. Enter the
5.
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it may appear in the router's DHCP table. The MAC address will be 12 hexadecimal
digits.
Click Add to add your entry. You can add several stations to the list, but the entries will be
discarded if you do not click Apply.
Note: You can copy and paste the MAC addresses from the router's Attached Devices menu
into the MAC Address box of this menu. To do this, configure each wireless computer to
obtain a wireless link to the router. The computer should then appear in the Attached Devices
menu.
Note: If you are configuring the router from a wireless computer whose MAC address is
not in the Trusted Wireless Stations list, and you select Trusted Wireless Stations only,
you will lose your wireless connection when you click Apply. You must then access the
router from a wired computer to make any further changes.
Make sure the Turn Access Control On check box is selected, then click Apply.
6.
Now, only devices on this list will be allowed to wirelessly connect to the DG834G. This prevents
unauthorized access to your network.
4-8
202-10006-01
Wireless Configuration