NETGEAR WG311 Installation Manual page 21

Install the NETGEAR 54 Mbps Wireless
PCI Adapter WG311.
Shut down the PC and remove the power
a.
cord. Hold the PCI Adapter with the
NETGEAR logo facing up and insert it
into an available PCI slot.
Connect the antenna to the adapter and
position the antenna to the up position.
Reconnect the power cord and reboot the
computer.
The Found New Hardware Wizard
b.
displays. Click Next and follow the
prompts to proceed.
Click Continue Anyway if you are
prompted with a Windows XP Logo
testing message.
After the installation completes, click
c.
Finish to close the wizard.
You should see the WG311 system tray icon
on the lower right portion of the Windows
task bar.
Windows XP will display a Wireless
Network Connection message.
Basic Setup
Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311
Add New Hardware Wizard
WG311 System Tray Icon
Windows XP Network Connection Alert
2-5