NETGEAR WG311 Installation Manual page 13

wireless technology adds issues such as range, interference, signal quality, and security to the
picture.
To help overcome potential barriers to successfully using wireless networks, the table below
identifies how to accomplish such things as connecting to a wireless network, assuring appropriate
security measures are taken, browsing the Internet through your wireless connection, exchanging
files with other computers and using printers in the combined wireless and wired network.
Table 1-1. A Road Map for How to Get There From Here
If I Want To ... ? What Do I Do?
Connect to a
1. Identify the
wireless
wireless
network
network name
(SSID) and, if
used, the
wireless
security
settings.
2. Set up the
NETGEAR 54
Mbps Wireless
PCI Adapter
WG311 with
the settings
from step 1.
Protect my
1. Assure that the
wireless
wireless
connection from
network has
snooping,
security
hacking, or
features
information
enabled.
theft.
2. Configure my
WG311 with
the security
settings of the
wireless
network.
3. Use Windows
security
features.
Introduction
Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311
What's Needed?
1. A wireless network
2. A desktop PC within the
operating range of the wireless
network. For guidelines about
the range of 802.11b/g
wireless networks, please see
"Observe Location and Range
Guidelines" on page
1. A wireless network with
authentication and WEP
encryption enabled.
2. Wireless networking
equipment that supports WEP
encryption, such as the
WG311 and all NETGEAR
wireless networking products.
How Do I?
To set up the WG311, see
Chapter 2, "Basic Setup"
follow the instructions provided.
To learn about wireless
networking technology, see
Appendix B, "Wireless
Networking Basics"
2-2.
introduction.
To learn about wireless
networking security, see
"Authentication and WEP" on
page B-2.
To use WEP security features,
please see
Security Features" on page 3-8
and configure your WG311
accordingly.
and
for a general
"Enabling Wireless
1-3