Set Your Network Password - NETGEAR WG102 ProSafe Wireless Access Point WG102 WG102 User Manual

XEPS103 Space-Saving Powerline Network Extender User Guide
3. A Welcome screen appears.
Figure 1-4
4. Click Next and follow the instructions on the screen until the installation of the utility is
complete.
5. When the installation is complete, click Finish.

Set Your Network Password

The fastest and most reliable way to set the network password is to set the password for all devices
at once. To do this, you need the device password on the back label of each PowerLine device.
There are two steps to setting the password: first enter the device password for each remote
PowerLine device, and then set the network password.
1. Enter the device password for each remote PowerLine device:
a. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.
8
v1.0, February 2007