Connect The Xeps103 To The Router - NETGEAR WG102 ProSafe Wireless Access Point WG102 WG102 User Manual

XEPS103 Space-Saving Powerline Network Extender User Guide
– WPN824, WPNT834
– WNR834M, WNR834B
If in doubt, check the label on your router's power adapter.
• Your Ethernet network is set up and an Ethernet LAN port is available on your router.
• Your Internet connection is working.
• Each computer or device to be used on your network has an Ethernet port.

Connect the XEPS103 to the Router

1. Disconnect your router from its power adapter.
2. Plug the gray dual output cable, attached to the XEPS103 Space-Saving Powerline Network
Extender, into a LAN port and DC power inlet on your router.
Figure 1-2
4
v1.0, February 2007