Adapter Encountered A Problem On Startup; There Are No Adapters Detected; Security Code Issues; Tv Image Is Rough, Frozen Or Delayed - NETGEAR PTV1000 User Manual

Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
• Sometimes the inputs are located beneath the regular channels on the TV. Try selecting the
lowest TV channel and then go down one channel.

Adapter Encountered a Problem on Startup

The adapter is experiencing technical difficulties. First turn the adapter off and back on again. If
this does not resolve the issue, see

There are No Adapters Detected

It may be necessary to scan multiple times. If rescanning does not solve the issue, make sure the
adapter is on and the TV is displaying the To get started screen.
Also, try moving the laptop or the adapter to different places in the room. The adapter and TV
should be in the same room to work properly. If this does not work, see
Many Issues" on page

Security Code Issues

The phrase, That security code is not correct... in the Security Code section, means the wrong
security code has been entered. Make sure to type the code exactly as shown on the TV screen. The
security code number will change after an incorrect entry.
If the connection fails right after a correct security code is entered, it is necessary to connect again
and retype the security code.

TV Image is Rough, Frozen or Delayed

To fix a rough, frozen, or delayed image try each of the following steps individually.
• Check the laptop's CPU status. Right-click on the taskbar and choose Start Task Manager. In
the Task Manager window click the Processes tab. Under the CPU heading, check
WiDiApp.exe. If the WiDiApp.exe CPU number is 80 or above, save documents, and close
unused applications.
• Check the network link speed. Right click on the taskbar and choose Start Task Manager. In
the Task Manager window click the Networking tab. The link speed should be higher than 36
Mbps. If not, try moving the adapter to a different position that is farther away from other
electronic equipment, or closer to the laptop. If this does not help, try disconnecting the
adapter and connecting again.
• Change the channel on the wireless router. See the router's manual for channel changing
instructions. (If you are not using a router, see the next solution.)
2-3
"Adapter Does Not Work" on page
2-7.
v1.0, January 2010
2-6.
"Common Solutions to