Setting The Ring Tones - NETGEAR SPH200D User Manual

Cordless Internet Phone with Skype Model SPH200D User Manual
• Muting and Un-muting. The mute feature turns off the microphone in the phone so that the
caller cannot hear you. You will still be able to hear the caller.
– To mute the microphone, press
– When the microphone is muted, press
• Hands Free Speaker. You can talk on the phone without holding the handset.
– To turn on the hands free speaker, press
– Press again to turn off the speaker.
• Headset (not included). If you have a headset, you can plug it into the headset jack at the side
of your handset.

Setting the Ring Tones

You can personalize your phone's sound by setting the ringer melody, keypad tone, and ringer
volume on the Tones menu.
To go to the Tones menu, press Menu>Settings>Tones.
You can change these settings:
• Ring Type. Your handset has four ring types: Skype,
SkypeIn, Landline, and Intercom. Select the ring type that
you want. Scroll and select a melody, and then press OK.
The new settings is saved.
• Ring Tone. Scroll and select a melody, and then press OK.
The new settings is saved.
• Ring Volume. Press
volume level, and then press Select.
• Notification. Scroll to the new setting, and then press Select
when finished.
• Keypad Tone. The keypad tone is the sound you hear when
you press a button on your handset. Scroll and select the new
setting.
• Confirmation. You hear the confirmation tone when you
place the handset on the charger, or after certain events.
6-8
during a call.
. The caller can now hear you again.
(Up or Down) to scroll to a
v1.0, November 2006
during a call. Start talking.
Figure 6-3
Advanced Features