Specifications - Makita UC120D Instruction Manual

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
2-1. Switch trigger
2-2. Lock-off button
3-1. Screw
3-2. Sprocket guard
4-1. Hex socket head bolt
4-2. Hex wrench
4-3. Guide bar
5-1. Guide bar

SPECIFICATIONS

Chain speed per minute (min
Length of guide bar
Saw chain
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear eye protection.
･
Wear ear protection.
･
Wear a helmet, goggles and ear
protection.
･
Use appropriate protection for foot-leg
and hand-arm.
･
Do not expose to rain.
･
Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
･
This saw is to be used by properly
trained operators only.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
Explanation of general view
5-2. Cutter
6-1. Sprocket
6-2. Saw chain tension adjusting spring
6-3. Concave portion of guide bar
7-1. Hex socket head bolt
8-1. Hex socket head bolt
8-2. Hex wrench
9-1. Chain oil
9-2. Saw chain
10-1. Tip guide
Model
-1
)
Type
Pitch
No. of drive links
Overall length
Net weight
Rated voltage
END005-3
Intended use
The tool is intended for cutting branches.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3.38 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.6 m/s
4
11-1. Lower guide
14-1. Top plate angle
14-2. Side plate angle
14-3. Top filing angle
14-4. Depth gauge
15-1. Scabbard (chain cover)
15-2. Battery cover
16-1. Guide bar
16-2. Screwdriver
UC120D
160 m/min.
115 mm
25 AP
1/4"
42
468 mm
2.1 kg
D.C. 12 V
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
) : 80 dB(A)
pA
Wear ear protection
2
) : 8.9 m/s
h
2
ENE031-2
ENG905-1
ENG900-1