Hour Meter; Overheat-Alert Indicator; Digital Speedometer - Yamaha 40v Owner's Manual

EMU26651

Hour meter

This meter shows the number of hours the
engine has been run. It can be set to show
the total number of hours or the number of
hours for the current trip. The display can
also be turned on and off.
To change the display format, press the
" " (mode) button. The display can show
total hours or trip hours, or turn off.
To reset the trip hours, simultaneously press
the " " (set) and "
more than 1 second while the trip hours are
displayed. This resets the trip counter to 0
(zero).
The total number of hours the engine has
been run cannot be reset.
EMU26583

Overheat-alert indicator

If the engine temperature rises too high, the
alert indicator will start to blink. For further in-
Instruments and indicators
ZMU04631
ZMU04633
" (mode) buttons for
formation on reading the indicator, see page
29.
ECM00052
NOTICE
Do not continue to run the engine if the
overheat-alert indicator is on. Serious en-
gine damage will occur.
1
1. Overheat-alert indicator
EMU26602

Digital speedometer

This gauge shows the boat speed and other
information.
1. Speedometer
2. Fuel gauge
3. Trip meter/clock/voltmeter
4. Alert indicator(s)
All segments of the display will light momen-
tarily after the main switch is turned on and
will return to normal thereafter.
ZMU04632
25