Specifications And Requirements; Specifications - Yamaha 40v Owner's Manual

EMU31480

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821E
Dimension:
Overall length:
40VMHD 1281 mm (50.4 in)
50HET 670 mm (26.4 in)
50HMHD 1281 mm (50.4 in)
Overall width:
40VMHD 349 mm (13.7 in)
50HET 360 mm (14.2 in)
50HMHD 360 mm (14.2 in)
Overall height L:
40VMHD 1350 mm (53.1 in)
50HET 1319 mm (51.9 in)
50HMHD 1350 mm (53.1 in)
Transom height L:
533 mm (21.0 in)
Weight (AL) L:
40VMHD 84.0 kg (185 lb)
50HET 87.0 kg (192 lb)
50HMHD 84.0 kg (185 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
40VMHD 29.4 kW@5000 r/min
(40 HP@5000 r/min)
50HET 36.8 kW@5000 r/min
(50 HP@5000 r/min)
50HMHD 36.8 kW@5000 r/min
(50 HP@5000 r/min)
Idling speed (in neutral):

Specifications and requirements

Engine:
Drive unit:
800 ±50 r/min
Type:
2-stroke L
Displacement:
3
698.0 cm
Bore × stroke:
67.0 × 66.0 mm (2.64 × 2.60 in)
Ignition system:
CDI
Spark plug with resistor (NGK):
40VMHD BR7HS-10
50HET BR8HS-10
50HMHD BR8HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
40VMHD Tiller
50HET Remote control
50HMHD Tiller
Starting system:
40VMHD Manual
50HET Electric
50HMHD Manual
Starting carburetion system:
40VMHD Choke valve
50HET Prime start
50HMHD Choke valve
Min. cold cranking amps (CCA/EN):
50HET 347.0 A
Min. rated capacity (20HR/IEC):
50HET 40.0 Ah
Alternator output:
40VMHD 80 W
50HMHD 80 W
Maximum generator output:
50HET 6 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
9