Instruments And Indicators; Indicators; Overheat-Alert Indicator; Digital Tachometer - Yamaha 40v Owner's Manual

Instruments and indicators

EMU36014

Indicators

EMU36033

Overheat-alert indicator

If the engine temperature rises too high, this
indicator will light up. For further information
on reading the indicator, see page 29.
ECM00052
NOTICE
Do not continue to run the engine if the
overheat-alert indicator is on. Serious en-
gine damage will occur.
1. Overheat-alert indicator
EMU26493

Digital tachometer

The tachometer shows the engine speed
and has the following functions.
All segments of the display will light momen-
tarily after the main switch is turned on and
will return to normal thereafter.
24
1
3
4

1. Tachometer

2. Trim meter

3. Hour meter
1
4. Overheat-alert indicator
5. Set button
6. Mode button
TIP:
The water separator and engine trouble-alert
indicators only operate when the engine is
equipped with the appropriate functions.
ZMU04922
EMU36050
Tachometer
The tachometer displays engine speed in
hundreds of revolutions per minute (r/min).
For example, if the tachometer display reads
"22" then the engine speed is 2200 r/min.
EMU26621
Trim meter
This meter shows the trim angle of your out-
board motor.
Memorize the trim angles that work best
G
for your boat under different conditions.
Adjust the trim angle to the desired using
the power trim and tilt switch.
If the trim angle of your motor exceeds the
G
trim operating range, the top segment on
the trim meter display will blink.
5
2
6
ZMU06645