Table of Contents
Advertisement
How to Use the Script File
When you upgrade the MATWorX from the former
version to the new version, the script data file of the
MACH script editor in the former version MATWorX
is stored to the other folder automatically.
The following explains how to use the script data file
of the former version MATWorX on the MACH script
editor of the new version MATWorX.
1. Launch Microsoft Windows on your PC.
2. Select Programs/MATWorX Ver.x/MATWorX
from the Start taskbar.
3. The MATWorX Taskbar is displayed.
NOTE:
4. Select MACH Script Editor from the application
menu, or click [
NWA-008862-001 Rev.2.1
ajch1001.fm
While MATWorX is connecting to PBX,
activation status (A or N) of software key
code is displayed as PBX software
information in addition to its software
version. For Remote PIM over IP system,
Main site, Remote site (normal mode),
Remote site (survival mode) are displayed as
site information. For details, refer to
MATWorX User Guide.
[MATWorX Ver.7 or later required]
] button.
OCTOBER/31/2005
CHAPTER 1 MATWorX
3. Installing MATWorX
Page 31
Advertisement
Table of Contents
