Changing The Cutting Disc; Using The Base Discs; Cleaning, Care & Maintenance - Buffalo G784 Instruction Manual

Hide thumbs Also See for G784:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
Telephone Helpline: 0845 146 2887 (United Kingdom)

Changing the Cutting Disc

WARNING: The blades on the cutting disc are sharp. Take care to avoid the edges when
changing discs.
Disconnect the appliance from the mains power supply.
1.
Turn the lid release knob anti-clockwise.
2.
Remove the food pusher (if inserted) and carefully lift the lid.
3.
Turn the disc anti-clockwise and lift it away from the appliance. This may require a sharp tap to free it
4.
from the shaft.
Slot the new disc in place. Turn the disc if necessary to drop it in place over the lugs.
5.
Note: Ensure the appliance is clean and free from food debris when changing discs to
ensure the disc can be securely fitted.
Turn the disc clockwise to secure it in position.
6.
Lower the lid and turn the lid release knob clockwise to secure it in place.
7.
Note: The deflector can also be removed by following this procedure. Removing the
deflector is necessary to thoroughly clean the appliance.

Using the Base Discs

Some cutting processes require two discs to be inserted into the
appliance.
Open the lid and remove the cutting disc(s), as described above.
1.
Slot the desired base disc onto the appliance.
2.
Note: The base cutting disc is not perfectly circular
and has a lip that sits in the cutter mouth to keep it
securely in place.
Slot the 8 or 10mm slicing disc on top of the base disc, ensuring
3.
it is securely connected to the centre pin and spins freely.
WARNING: Only the thinner aluminium cutting
discs are suitable for use with the base discs. DO
NOT use the thicker plastic cutting discs.
Lower the lid and turn the lid release knob clockwise to secure it
4.
in place.
Cleaning, Care & Maintenance
Always turn off and disconnect the appliance from the power
supply before cleaning.
Use soapy water and a damp cloth to clean the appliance and cutting discs.
DO NOT wash the cutting discs in the dishwasher.
Dry thoroughly after cleaning.
Ensure all foodstuffs are removed from the appliance after each use.
If required, lift the cover and loosen the two Lid Release knobs to remove the lid and clean.
UK
4

Advertisement

Table of Contents
loading

Table of Contents