Makita PRM0700 Operator's Manual page 102

EN 12 UNPACKING AND ASSEMBLY
Hook all the plastic profiles to the frame
7
tubes with the help of a screwdriver (7).
Insert the handle (8) into the holes of the
canvas (9). Attach this to the frame using
the screws (10), following the indicated
sequence, and complete the assembly
screwing the four front and rear self-
threading screws (11).
Lastly, fit the stiffening bar (12) on the
outside of the frame base, keeping the flat part towards the canvas and using
the nuts and screws supplied (13) in the sequence indicated.
3 (x 2) 6 (x 4) 10 (x 2) 11 (x 4) 13 (x 2)