NEC MultiSync MT1040 User Manual page 29

When the tool bar is not displayed:
Multi cursor (blue marks)
Folder Folder
Folder
When the tool bar is not displayed, use the
to the next folder or return to the previous folder.
Folder
Slide(Table) cursor (yellow marks)
Slide Slide
Slide Slide
When the tool bar is not displayed, use the
to the next slide or return to the previous slide.
Slide
NOTE: To use the or button to advance to the next slide or
folder, or return to the previous slide or folder, you must be in the
Projector mode.
To be in the Projector mode, press the Computer/Projector Select
button and the button lights in red.
Folder Folder
or button to advance
Slide Slide
Slide Slide
or button to advance
Auto Play Mode
• If the "Auto Play" option is selected in "PC Card Viewer Op-
tions" of the menu, any given slide will start to play automati-
cally. You can also specify Auto Play Interval between 5 and 300
seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is possible to switch from a PC
Card Viewer slide to the video picture then back to the PC Card Viewer
slide simply by using the Source button.
NOTE: Even if you switch the current PC Card Viewer source to
another source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
COMPUTER
SOURCE
NOTE: The PC card editing operation cannot be performed from the
projector. Do so using the PC Card Viewer software.
E–29
POWER
OFF ON
PJ
PROJECTOR
AUTO ADJ.
S A