Video Mode; Gamma; Noise Reduction; Color Matrix - NEC MultiSync MT1040 User Manual

Nec lcd projector user's manual
Hide thumbs Also See for MultiSync MT1040:
Table of Contents

Advertisement

Video Mode

Video Mode

Gamma

Noise Reduction

Color Matrix

Gamma:
Gamma
Normal
Natural 1
Use the
or
buttons to choose "Normal" when in a lighted
room and "Natural 1&2" when in a darkened room. "Natural 1"
for better flesh tone; "Natural 2" for true reproduction of middle
tones.
Each mode is recommended for :
Normal:
Default for RGB signal (Factory preset)
Natural 1: Default for Video and S-Video signal
Natural 2: Default for component signal
Noise Reduction:
Noise Reduction
Off
Low
Medium
You can select one of the following three levels for reducing video
noise to your preference.
NOTE: The lower the Noise Reduction level, the better the im-
age quality by way of higher video bandwidth.
Color Matrix
Color Matrix
Select Color Matrix
HDTV
SDTV
Select Color Matrix
B-Y/R-Y
Cb/Cr
Pb/Pr
First select an appropriate color matrix to fit your component
signal for HDTV or SDTV. Then select an appropriate matrix
type from B-Y/R-Y, Cb/Cr or Pb/Pr.
NOTE: The Color Matrix feature is available for component
video signal only.
Natural 2
High

Projector Options

Projector Options

Menu

Setup
Menu
Menu

Language

English

Projector Pointer

Pointer 1
Allows you to set preferences for the on-screen menu.
Language:
You can choose one of seven languages for on-screen instruc-
tions. The options are: English, German, French, Italian, Span-
ish, Swedish and Japanese.
Projector Pointer:
This enables you to select from eight different Pointer icons for
the "Pointer" button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the
selected area on the screen.
NOTE: There may be cases where the Pointer function is not avail-
able for a non-interlace signal at 15kHz such as video game.

Source Display:

You can turn on and off the information for input name such as
VIDEO and RGB.
When this option is on, the current input will be displayed each
time you switch sources or turn on the projector.
E–22
Enables you to set preferences and other
operating options.
Source Display
On
Off
Pointer 1
Pointer 2
Pointer 3
Pointer 4
Pointer 5
Pointer 6
Pointer 7
Pointer 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync mt1045Multisync mt840

Table of Contents