Using the Headband Style Headset with your Cordless Telephone
■
Remove the ear cushion.
■
Snap on the earloop ring. (Make sure the earloop ring lies flat against the microphone boom as shown.)
■
Insert the earloop into the earloop ring. (Installation for the right ear is shown. For the left ear, insert the
earloop from underneath the earloop ring.)
DS1000/2000 Cordless Telephone User Guide
Figure 19: Removing the Ear Cushion
Figure 20: Snapping on the Earloop Ring
Figure 21: Inserting the Earloop into the Earloop Ring
Installation
Chapter 1: Installation ◆ 17
1