Black & Decker BDH1850SM Instruction Manual page 6

ATTAChINg A CLeANINg PAD - fig. f
Replacement cleaning pads are available from your Black
& Decker dealer (cat. no. SMP20).
• Place a micro-fiber cleaning pad (6) on the floor with
the 'hook & loop' side facing up.
• Raise the steam mop off the resting mat (7) and
press it down onto the cleaning pad. You are now
ready to steam clean and sanitize your floor.
NOTICe:
Always place the steam mop on the resting
mat with the handle tube (4) in the upright position
when stationary and make sure the steam mop is
turned off when not in use.
ReMOvINg A CLeANINg PAD - fig. g
CAUTION:
changing the cleaning pad on your steam mop. Do not
wear slippers or open-toed footwear.
• Return the handle tube (4) to the upright position
and turn the steam mop 'OFF'.
• Place the steam mop on the resting mat (7) and wait
until it cools down. (approximately five minutes)
• Place the front of your shoe onto the cleaning pad
removal tab (14) and press down firmly.
• Lift the steam mop up off the cleaning pad.
NOTICe:
Always place the steam mop on the resting
mat (7) with the handle (4) in the upright position when stationary and make sure the steam
mop is turned off when not in use.
ATTAChINg The CARPeT gLIDeR - fig. h
• Place carpet glider on the floor.
• Lightly press the steam mop down onto the carpet
glider (8) until it clicks into place.
NOTICe:
Always place the steam mop on the resting
mat (7) with the handle tube (4) in the upright position
when stationary and make sure the steam mop is
turned off when not in use.
ReMOvINg The CARPeT gLIDeR
CAUTION:
changing the carpet glider on your steam mop. Do not
wear slippers or open-toed footwear.
• Return the handle tube to the upright position and
turn the steam mop 'OFF'.
• Place the steam mop on the resting mat and wait until it cools down. (approximately
five minutes)
• Place the front of your shoe onto the carpet glider removal tab (15) and press down firmly.
• Lift the steam mop up off the carpet glider.
NOTICe:
Always place the steam mop on the resting mat with the handle in the upright
position when stationary and make sure the steam mop is turned off when not in use.
hAND heLD STeAM CLeANeR ATTAChMeNTS
NOTICe:
First remove the hand held steam cleaner
from the steam body.
ATTAChINg The hOSe
• Press in the clips (17) on either side of the hose (16).
• Press the hose onto the steam nozzle (18) and
release the clips.
Always wear suitable shoes when
Always wear suitable shoes when
- fig. I
f
g
h
I
16
6
17