Complete Installation - Maytag MTW6500TB Service Manual

COMPLETE INSTALLATION

1. Check the electrical requirements. Be
sure that you have the correct electrical
supply and the recommended grounding
method. See "Electrical Requirements,"
page 2-4.
2. Check that all parts are now installed. If
there is an extra part, go back through the
steps to see which step was skipped.
3. Check that you have all of your tools.
4. Keep the foam packing ring from the
washer tub for future relocation of the
washer. Dispose of or recycle all other
packaging materials.
5. Check that the water faucets are on.
6. Check for leaks around faucets and inlet
hoses.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
8. Remove any protective film or tape re-
maining on the washer.
9. Read "Washer Use," page 3-3.
10. To test and to clean your washer, mea-
sure 1/2 of the detergent manufacturer's
recommended amount of High Efficiency
(HE) powdered or liquid detergent for a
medium size load and pour it into the de-
tergent dispenser. Close the lid. Press
POWER. Select a normal cycle and press
Start. Allow it to complete one whole cycle.
2-9