Honeywell LYNXR-2 Programming Manual page 7

Field Function
TO PROGRAM SYSTEM STATUS, & RESTORE REPORT CODES ( ✱ 59– ✱ 76, & ✱ 89):
With a 3+1 or 4+1 Standard Format: Enter a code in the first box: 1–9, 0, B, C, D, E, or F. Enter "#+10" for 0, "#+11" for
B, "#+12" for C, "#+13" for D, "#+14" for E, "#+15" for F.
A "0" (not "#+10") in the first box will disable a report.
A "0" (not "#+10") in the second box will result in automatic advance to the next field when programming.
With an Expanded or 4+2 Format: Enter codes in both boxes (1st and 2nd digits) for 1–9, 0, or B–F, as described above.
A "0" (not "#+10") in the second box will eliminate the expanded message for that report.
A "0" (not "#+10") in both boxes will disable the report.
With Ademco Contact ID Reporting: Enter any digit (other than "0") in the first box, to enable zone to report (entries in the
second boxes will be ignored).
A "0" (not "#+10") in the first box will disable the report.
Examples: For Code 3 (single digit), enter:
For Code 3 2 (two digits), enter:
For Code B 2 (Hexadecimal), enter:
SYSTEM STATUS REPORT CODES ( ✱ 59– ✱ 68)
✱ 59
EXIT ERROR REPORT CODE
✱ 60
TROUBLE REPORT CODE
✱ 61
BYPASS REPORT CODE
✱ 62
AC LOSS REPORT CODE
✱ 63
LOW BATTERY REPORT CODE
✱ 64
TEST REPORT CODE
✱ 65
OPEN REPORT CODE
✱ 66
ARM AWAY/STAY REPORT CODE
✱ 67
RF XMTR LOW BATTERY REPORT
CODE
✱ 68
CANCEL REPORT CODE
RESTORE REPORT CODES ( ✱ 70– ✱ 76)
✱ 70
ALARM RESTORE REPORT CODE
✱ 71
TROUBLE RESTORE REPORT CODE
✱ 72
BYPASS RESTORE REPORT CODE
✱ 73
AC RESTORE REPORT CODE
✱ 74
LOW BAT RESTORE REPORT CODE
Programmed Values
3 | 0
3 | 2
#+11 | 2
2nd digit is automatically sent as 2nd digit of the zone alarm
report code programmed in
[1]
is selected.
| [1,0]
| [0,0]
| [0,0]
| [1,0]
| [1,0]
†† [0
]
†† [0,0]
AWAY STAY
| [1,0]
| [1,0]
2nd digit is automatically sent as 2nd digit of the zone alarm
[1]
report code programmed in
is selected.
| [1,0]
| [0,0]
| [0,0]
| [1,0]
- 7 -
[ ] = Table 1 Default Value
✻
56, if expanded or 4+2 reporting
( †† 2nd digit is automatically sent as the user
number if expanded or 4+2 reporting is
selected.)
✻
56, if expanded or 4+2 reporting