Honeywell LYNXR-2 Programming Manual page 5

Field Function
✱ 42
SECONDARY PHONE NUMBER
All four digits of the subscriber account number must be entered in Fields

✻ ✻ ✻ ✻
selected in 48 (option 5), all ten digits of the Subscriber Account number must be entered.
For fields ✻ 43, ✻ 44:
Enter 4 to 10 digits. Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; [#+15 for F]. Enter ✻ as 4th digit, if 3+1
dialer reporting is to be used. If only 3 digits used, pressing ✻ advances to the next field. Enter [ ✻ ] as the fifth digit if a 4-
digit account number (for 4+1, 4+2, CID®) is used.
To clear entries from field, press ✻ 43 ✻ or ✻ 44 ✻ . Examples:
For Acct. 1234, enter: 1 | 2 | 3 | 4
1| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0
✱ 43
PRIMARY SUBS ACCT #
✱ 44
SECONDARY SUBS ACCT #
For field ✻46
Enter up to 24 digits. Enter 0-9, #+11 for '✻'; #+12 for '#'; #+13 for a pause (two seconds).
✱ 46
"FOLLOW ME" REMINDER
PHONE NUMBER
✱ 47
PHONE SYSTEM SELECT
✱ 48
REPORT FORMAT for PRIM./SEC
† Entering a number other than the one specified may give unpredictable results.
Programmed Values
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits
entered, pressing ✻ advances to the next field. To clear entries from
field, press ✻ 41 ✻ .
; For Acct. B234, enter: #+11| 2 | 3 | 4
; For Acct. 123, enter:
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits
entered, pressing ✻ advances to the next field. To clear entries from
field, press ✻ 46 ✻ .
† [5]
Central
Station Pulse
No WATS 0 = No Speaker
Phone
WATS 2 = No Speaker
Phone
Primary Secondary
0 = 3+1, 4+1 ADEMCO L/S STANDARD
1 = 3+1, 4+1 RADIONICS STANDARD
2 = 4+2 ADEMCO L/S STANDARD
3 = 4+2 RADIONICS STANDARD
5 = ADEMCO CONTACT ID® REPORTING WITH 10-DIGIT SUBS ACCT NO.
6 or undefined = 4+2 ADEMCO EXPRESS
7 = ADEMCO CONTACT ID® REPORTING WITH 4-DIGIT SUBS ACCT NO.
8 = 3+1, 4+1 ADEMCO L/S EXPANDED
9 = 3+1, 4+1 RADIONICS EXPANDED
- 5 -
[ ] = Table 1 Default Value
✻ ✻ ✻ ✻
43 and
For Acct. 1234567890, enter:
1 | 2 | 3 | ✻
Note: If you are using Pulse (rotary) Dialing, you must
enter the numbers slowly to allow the pulse dialer
time to operate.
Dialing Mode
Tone
1 = No 4 = With
Speaker Phone Speaker Phone
3 = No
Speaker Phone
[7, 7]
Note: Option 5 or 7 (ADEMCO Contact ID®)
must be selected for AAV.
✻ ✻ ✻ ✻
44. If ten digit format is
See note above.
See note above.
Pulse Tone
5 = With
Speaker Phone
6 = With 7 = With
Speaker Phone Speaker Phone