Honeywell LYNXR-2 Programming Manual page 4

Field Function
✱ 32
SOUNDER TIMEOUT
✱ 33
ALARM BELL TIMEOUT
✱ 34
EXIT DELAY
✱ 35
ENTRY DELAY 1 (zone type 01)
✱ 36
ENTRY DELAY 2 (zone type 02)
✱ 37
AUDIBLE EXIT WARNING /
QUICK EXIT
✱ 38
CONFIRMATION OF ARMING DING
Note: If LYNX is armed by RF button (key fob),
a confirmation ding occurs immediately after
arming regardless of field *38 settings. If LYNX
is disarmed by RF button (key fob), additional
disarming confirmation ding is provided. The
ding occurs immediately after disarming and is
longer than arming confirmation ding.
✱ 39
POWER UP IN PREVIOUS STATE
† Entering a number other than the one specified may give unpredictable results.
DIALER PROGRAMMING ( ✱ 40– ✱ 53)
In fields ✱ 40, ✱ 41, ✱ 42, enter up to the number of digits shown. Enter 0–9; #+11 for '
a pause.
✱ 40
PABX ACCESS CODE
✱ 41
PRIMARY PHONE NUMBER
Programmed Values [ ] = Table 1 Default Values
† [0]
0=timeout; 1=no timeout
† [1]
0 = none; 1=4 min; 2=8 min; 3=12 min; 4 = 16 min
UL installations = 1 (4 min) minimum
† [70]
|
00-99 = exit delay time (in seconds).
UL installations = 60 seconds max.
† [30]
|
00-99 = entry delay time (in seconds);
UL installations = 45 seconds max.
† [60]
|
00-99 = entry delay 2 time (in seconds);
UL installations = 45 seconds max.
† [1, 1]
Exit Warn Quick Exit
0 = no; 1 = yes
† [0]
0 =
no arming confirmation ding after arming system by APX32EN keypad or
;
RF keypad 1 = arming confirmation ding after arming system by APX32EN
keypad or RF keypad; 2 = arming confirmation ding after arming from RF
keypad only
If Option 1 is selected, confirmation of arming is provided by a 1/2 second
sounder "ding" that sounds when closing report is sent, or at the end of exit
delay. If Option 2 is selected the external sounder "ding" occurs immediately
after arming from an RF keypad.
Note: Confirmation ding only sounds when LYNX is Armed Away or disarmed
after being Armed Away.
† [1]
0 = no; 1 = yes; UL installations = 1
Enter 6 digits. If fewer than 6 digits are entered, pressing ✻
advances to the next field. To clear entries from field, press ✻ 40 ✻
Enter up to 20 digits; Do not fill unused spaces. If fewer than 20 digits
entered, pressing ✻ advances to the next field. To clear entries from
field, press ✻ 41 ✻ .
- 4 -
'; #+12 for '#'; #+13 for
✻