Sequential Polling; Polled Transmit (Monochrome Only); Setup For Polled Transmit - Brother FAX-2480C User Manual

Sequential polling

The machine can request documents from
several fax machines in one operation.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 7.
7.Polling RX
c
Press a or b to choose Standard,
Secure or Timer .
Press OK.
d
Do one of the following:
If you chose Standard, go to
step e.
If you chose Secure, enter a
four-digit number, press OK, go to
step e.
Note
If you did not enter the correct Secure
Code, you will receive the message
"Disconnected".
If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step e.
e
Specify the destination fax machines,
which you wish to poll by using
Speed-Dial, Search, a Group or the dial
pad. You must press OK between each
location.
f
Press Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting
jobs on page 29.
Polled transmit
11
(Monochrome only)
Polled transmit lets you set up your machine
.
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and cancelling waiting jobs on page 29.)

Setup for polled transmit

a
Make sure you are in Fax mode
b
Load your document.
c
Press Menu, 2, 2, 6
6.Polled TX
d
Press a or b to choose Standard.
Press OK.
e
The LCD shows:
Next
1.Yes 2.No
f
Press 2 and press Mono Start.
Note
Once a document has been stored in
memory for polling transmit, it can be sent
and received more than once.
Polling
11
11
.
11
61