Specifications - Makita BJR181 Instruction Manual

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Shoe
2-2. Shoe button
3-1. Shoe button
3-2. Shoe

SPECIFICATIONS

Length of stroke
Strokes per minute(min
Max. cutting capacities
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
For Model BJR181
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.0 m/s
For Model BJR182
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Explanation of general view
4-1. Lock-off button
4-2. Switch trigger
5-1. Lamp
6-1. Hook
7-1. Blade clamp sleeve
7-2. Released position
7-3. Fixed position
Model
-1
)
Pipe
Wood
Overall length
Net weight
Rated voltage
) : 84 dB(A)
pA
) : 95 dB(A)
WA
value (tri-axial vector
2
) : 18.5 m/s
h,CW
2
) : 85 dB(A)
pA
) : 96 dB(A)
WA
BJR181
499 mm
3.7 kg
ENE020-1
Vibration
The vibration
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.0 m/s
ENG102-3
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENG220-2 WARNING:
The vibration emission during actual use of the
•
sum)
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENG102-3
is running idle in addition to the trigger time).
3
8-1. Blade
9-1. Blade clamp lever
11-1. Limit mark
12-1. Brush holder cap
12-2. Screwdriver
BJR182
28 mm
0 - 2,900
130 mm
255 mm
449 mm
3.6 kg
D.C. 18 V
total value (tri-axial
) : 19.5 m/s
h,CW
2
ENG220-2
vector sum)
2
ENG901-1