Cisco rv 120w Quick Start Manual page 8

On the Cisco RV 120W, push in the ON/OFF POWER SWITCH
S 6
TEP
button. The Setup Wizard searches for the Cisco RV120W.
The POWER LED on the front panel lights up green when the
power adapter is connected properly and the unit is turned on.
Next:
• If your hardware connection is successful, but the Setup Wizard needs
more information about your Internet connection, the Enter Username
and Password window appears. (See
Connection Information, page
• If your hardware connection is successful and the Setup Wizard
successfully detects your Internet connection, the Configure Router
window displays. (See
Entering Login and Internet Connection Information
Enter the username and password for your Cisco RV120W. The
S 1
TEP
default username and password are both admin. Click Next.
Choose your Internet connection type:
S 2
TEP
• Telephone (DSL)
• Cable broadband
• I don't know
Click Next.
The Setup Wizard confirms your Internet connection settings. If it
S 3
TEP
cannot detect or confirm your settings, you might need to provide
8
Entering Login and Internet
8.)
Configuring Security, page
Cisco Small Business RV 120W Quick Start Guide
10.)